loading
reading
writing
saving
searching
Bowers and Wilkins DM1400 Speakers - $300 (Cedar City)
QR Code Link to This Post
I'm located in Cedar City and cannot deliver to St. George or Northern Utah.
Tech specs:
Solid wood (walnut, rosewood, natural oak, or black ash) veneer over thick chipboard construction
Sealed acoustic suspension enclosure with a 28L internal volume, internally braced, two-way speakers
Two 6” woofers with rubber surrounds and die-cast frames - 150 mm Bextrene cone, heavily damped with PVA compounds, 26 mm diameter high-temperature voice coil - BW150/14
One 1” soft dome tweeter - 26mm special polyamide, laser-optimized - TZ26
Both electronically corrected for minimum inter-unit time delay
Frequency Response = 80 Hz - 20 kHz +/- 2 dB at centre of the listening window at 2 meters
-6 dB at 45 Hz, optimized to give essentially flat third octave response down to 35 Hz with asymmetrical room loading
Vertical Dispersion = +/- 1.5 dB over a 10 degree arc, 20 Hz to 10 kHz
Horizontal Dispersion = +0 -2 dB over a 40 degree arc, 20 Hz to 10 kHz
Crossover = true fourth-order acoustic, butterworth-squared characteristic, computer-optimised to greater than -40 dB reference 0 dB level, giving 24 dB per octave attenuation in the stop band - Bass driver first order difference filter
Crossover Frequencies = 500 Hz and 3 kHz
Impedance = 8 Ω nominal throughout entire operating range
Sensitivity = 86 dB, 1 watt, 1 meter
Power Handling = minimum of 30 watts into 8 Ω, no maximum upper limit because of electronic overload protection device
Dimensions = 22” H (31 ¼” H with original stands) x 10” D x 11 ½” W
Weight = 41.8 lbs each
Made in England (enclosures and drivers)